- Sep 04, 2018 -
With fluorescent lighting gradually being displaced in favor of LED, many thought the days of dealing with flickering lights were over. Despite flickering being less present in LED than with fluorescent systems, it is certainly still a factor. What are the causes of this, and are there solutions?
Types of Flickering
There are two types of flickering with lights – visible flicker and invisible flicker. Obviously visible flicker is the one our eyes can see, which is when the light output from a given source changes rapidly. It is considered that anything below a frequency of 100Hz can be seen.
There are health concerns with visible flickering. High lumens efficiency LED lamp Short-term exposure to frequencies in the 3Hz to 70Hz range are associated with epileptic seizures, with the highest possibility of occurrence being in the 15Hz to 20Hz range. With 1 in 4000 people suffering photosensitive epilepsy and many more who have not been diagnosed, this has become a public safety issue.
Invisible flicker is just as much of a problem if not more. It is the flicker that is present but we cannot see. The symptoms include dizziness, eyestrain, headaches, migraines, impaired thought, and other general sick-feeling symptoms.
Where does flicker come from?
To better understand flickering in lights, consider the theatrical effect known as strobe lighting. This is a deliberate flicker effect that delivers light at certain frequencies, causing the brain to interpret moving objects as if they were in slow motion. These specified frequencies are generally just a few flashes per second, but they are very close to frequencies that cause epileptic seizures.
Unintentional flickering in lighting equipment can be traced back to our power companies that designed electricity flow to use alternating current (AC) as opposed to direct current (DC). With AC power, the sine wave will peak both positively and negatively. This leaves it susceptible to being in a range that will cause flickering, or sometimes an audible hum.
How to solve LED flickering issues?
LED flickering can be tied back to the driver component within the lamp. The essential purpose of the LED driver design is to rely on a simple circuit to control output current, but without altering the frequency, the LED becomes likely to show visible flicker. However, this can be fixed by using constant current drivers, which remove the peaks of the sine wave.
Ultimately if the driver design of the LED bulb meets the requirements of both a stable DC current and ample ripple suppression, there should be no flicker. If flickering is present in your LED lamp (and you are not dimming with it), it was likely created with cheap driver components. The technology in LED lighting has advanced to the point where this should not happen, unfortunately there are companies that care more about their bottom line than the health of their customers.
How Dimming Causes LED Flickering
Another challenging variable for LED lamps to avoid flickering is through dimming. Most standard wall dimmers work by phase cutting, which removes part of the sine wave and reduces the voltage. However, this can have negative affects on an LED circuit and actually result in the flicker effect being amplified to a potentially dangerous level (3-15Hz range).
This is one of the main reasons why it’s hard to trust old dimming systems with new LED bulbs. The only way to be sure no flickering will be present is to get LED-specific dimming solutions for your LED lamps. It all comes back to the fact that LED is a long-term investment. In turn it is worth doing research to ensure you are getting a quality LED bulb, and that if you plan to dim with it you are getting an LED dimming system that has been tested as being compatible to the LED bulbs you intend to use.